Bondic baby board

I want to stand a small PCB edgewise on a bigger board. It will reflow
solder but we need to stand it up before we reflow.

I tacked a board onto a board with Bondic, the UV-cure epoxy, and we
ran it through the reflow oven. Bondic specs 150c max but it looks
fine, didn't fall over or anything.

https://www.dropbox.com/scl/fi/gwq09jj040o5ow3o0s2u8/Bondic_Baby_Board.jpg?rlkey=otvs4c1mtp5b96ffbcqr98lwf&raw=1

On a sunny day (Fri, 01 Dec 2023 11:18:21 -0800) it happened john larkin
<jl@650pot.com> wrote in <10ckmidm6i2qqoh0urjfc2q23e1qoj4p6d@4ax.com>:

>I want to stand a small PCB edgewise on a bigger board. It will reflow
>solder but we need to stand it up before we reflow.
>
>I tacked a board onto a board with Bondic, the UV-cure epoxy, and we
>ran it through the reflow oven. Bondic specs 150c max but it looks
>fine, didn't fall over or anything.
>
>https://www.dropbox.com/scl/fi/gwq09jj040o5ow3o0s2u8/Bondic_Baby_Board.jpg?rlkey=otvs4c1mtp5b96ffbcqr98lwf&raw=1

Depends how much vibration it has to endure I think, this just sits on a table, been working fine 24/7 since 2016:
 https://panteltje.nl/panteltje/pic/ethernet_color_pic/ethernet_color_pic_hardware_img_2335.jpg