Shithead Keith wrote:> > Upon taking the fan out of the car, I discovered a few things. > > 1) Multimeter signal did squat. > 2) PWM is +12V potential > 3) grounding PWM w/ 0-~5kOhms will cause the fan to run but "pulse" every few seconds, turning itself on and off. >5kOhms = nothing. At the higher resistances, the fan cycles faster and draws less current over a narrow range, probably less than 2kOhms. > > So I was totally on the wrong track.** Alouette, gentille alouette, Alouette, je te plumerai. ... Phil
Using a 12V 2A power supply direct and with 3V voltage divider?
Started by ●February 24, 2015
Reply by ●March 2, 20152015-03-02