Forums

4017A function generator -Finding resistance values

Started by Brigitte Gaudet October 22, 2011
Hello,

My 4017A function generator just died on me today. I opened it up and
saw two badly burnt resistors. I would like to replace them but I do
not know their values. How can I get the schematic for the 4017A
function generator? or anybody has this model and can tell me their
values?  R624 and R148.
thank you for your help.

ken
On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet
<gaudet.brigitte@gmail.com> wrote:

>Hello, > >My 4017A function generator just died on me today. I opened it up and >saw two badly burnt resistors. I would like to replace them but I do >not know their values. How can I get the schematic for the 4017A >function generator? or anybody has this model and can tell me their >values? R624 and R148. >thank you for your help. > >ken
Who makes the 4017A?
On Sat, 22 Oct 2011 19:00:38 -0400, Tom Biasi
<tombiasi@optonline.net> wrote:

>On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet ><gaudet.brigitte@gmail.com> wrote: > >>Hello, >> >>My 4017A function generator just died on me today. I opened it up and >>saw two badly burnt resistors. I would like to replace them but I do >>not know their values. How can I get the schematic for the 4017A >>function generator? or anybody has this model and can tell me their >>values? R624 and R148. >>thank you for your help. >> >>ken >Who makes the 4017A?
B&K Jon
On Oct 22, 7:04=A0pm, Jon Kirwan <j...@infinitefactors.org> wrote:
> On Sat, 22 Oct 2011 19:00:38 -0400, Tom Biasi > > <tombi...@optonline.net> wrote: > >On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet > ><gaudet.brigi...@gmail.com> wrote: > > >>Hello, > > >>My 4017A function generator just died on me today. I opened it up and > >>saw two badly burnt resistors. I would like to replace them but I do > >>not know their values. How can I get the schematic for the 4017A > >>function generator? or anybody has this model and can tell me their > >>values? =A0R624 and R148. > >>thank you for your help. > > >>ken > >Who makes the 4017A? > > B&K > > Jon
exactly B&K Ken
Brigitte Gaudet wrote:
> Hello, > > My 4017A function generator just died on me today. I opened it up and > saw two badly burnt resistors. I would like to replace them but I do > not know their values. How can I get the schematic for the 4017A > function generator? or anybody has this model and can tell me their > values? R624 and R148. > thank you for your help. > > ken
BKManuals.com shows "4017 10 MHz Sweep/Function Generator - Parts Schematics" for $10.00 here: http://www.bkmanuals.com/3000+.htm Ed
On Sat, 22 Oct 2011 16:35:24 -0700 (PDT), Brigitte Gaudet
<gaudet.brigitte@gmail.com> wrote:

>On Oct 22, 7:04&#2013266080;pm, Jon Kirwan <j...@infinitefactors.org> wrote: >> On Sat, 22 Oct 2011 19:00:38 -0400, Tom Biasi >> >> <tombi...@optonline.net> wrote: >> >On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet >> ><gaudet.brigi...@gmail.com> wrote: >> >> >>Hello, >> >> >>My 4017A function generator just died on me today. I opened it up and >> >>saw two badly burnt resistors. I would like to replace them but I do >> >>not know their values. How can I get the schematic for the 4017A >> >>function generator? or anybody has this model and can tell me their >> >>values? &#2013266080;R624 and R148. >> >>thank you for your help. >> >> >>ken >> >Who makes the 4017A? >> >> B&K >> >> Jon > >exactly B&K > >Ken
My point was that you should include the make and model number with your question. More important question. Would you just replace those resistors? Tom
On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet
<gaudet.brigitte@gmail.com> wrote:

>Hello, > >My 4017A function generator just died on me today. I opened it up and >saw two badly burnt resistors. I would like to replace them but I do >not know their values. How can I get the schematic for the 4017A >function generator? or anybody has this model and can tell me their >values? R624 and R148. >thank you for your help.
--- B&K Precision tech support: 1-800-462-9832 You may also want to ask for a schematic/maintenance manual and inquire as to the reason _why_ the resistors failed. -- JF
  This message is in MIME format.  The first part should be readable text,
  while the remaining parts are likely unreadable without MIME-aware tools.

--8323328-1865218025-1319386341=:5058
Content-Type: TEXT/PLAIN; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: QUOTED-PRINTABLE

On Sun, 23 Oct 2011, Tom Biasi wrote:

> On Sat, 22 Oct 2011 16:35:24 -0700 (PDT), Brigitte Gaudet > <gaudet.brigitte@gmail.com> wrote: > >> On Oct 22, 7:04=A0pm, Jon Kirwan <j...@infinitefactors.org> wrote: >>> On Sat, 22 Oct 2011 19:00:38 -0400, Tom Biasi >>> >>> <tombi...@optonline.net> wrote: >>>> On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet >>>> <gaudet.brigi...@gmail.com> wrote: >>> >>>>> Hello, >>> >>>>> My 4017A function generator just died on me today. I opened it up and >>>>> saw two badly burnt resistors. I would like to replace them but I do >>>>> not know their values. How can I get the schematic for the 4017A >>>>> function generator? or anybody has this model and can tell me their >>>>> values? =A0R624 and R148. >>>>> thank you for your help. >>> >>>>> ken >>>> Who makes the 4017A? >>> >>> B&K >>> >>> Jon >> >> exactly B&K >> >> Ken > My point was that you should include the make and model number with > your question. > More important question. Would you just replace those resistors? >
Yes. Initially I didn't realize it was a commercial piece of piece of=20 equipment, I read the "4017" in the subject header as the famous CMOS IC, and thought it was some piece of home made equipment made from a 4017. Michael --8323328-1865218025-1319386341=:5058--
On Oct 23, 12:12=A0pm, Michael Black <et...@ncf.ca> wrote:
> On Sun, 23 Oct 2011, Tom Biasi wrote: > > On Sat, 22 Oct 2011 16:35:24 -0700 (PDT), Brigitte Gaudet > > <gaudet.brigi...@gmail.com> wrote: > > >> On Oct 22, 7:04=A0pm, Jon Kirwan <j...@infinitefactors.org> wrote: > >>> On Sat, 22 Oct 2011 19:00:38 -0400, Tom Biasi > > >>> <tombi...@optonline.net> wrote: > >>>> On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet > >>>> <gaudet.brigi...@gmail.com> wrote: > > >>>>> Hello, > > >>>>> My 4017A function generator just died on me today. I opened it up a=
nd
> >>>>> saw two badly burnt resistors. I would like to replace them but I d=
o
> >>>>> not know their values. How can I get the schematic for the 4017A > >>>>> function generator? or anybody has this model and can tell me their > >>>>> values? =A0R624 and R148. > >>>>> thank you for your help. > > >>>>> ken > >>>> Who makes the 4017A? > > >>> B&K > > >>> Jon > > >> exactly =A0B&K > > >> Ken > > My point was that you should include the make and model number with > > your question. > > More important question. Would you just replace those resistors? > > Yes. > > Initially I didn't realize it was a commercial piece of piece of > equipment, I read the "4017" in the subject header as the famous CMOS IC, > and thought it was some piece of home made equipment made from a 4017. > > =A0 =A0Michael
Called B&K tech support, the guy emailed the parts list and schematics. ..wonderful. Ken
On Mon, 24 Oct 2011 16:10:10 -0700 (PDT) lerameur <lerameur@yahoo.com>
wrote in Message id:
<82ea4c68-a3aa-4713-8b46-4911c2bc617a@r2g2000vbj.googlegroups.com>:

>On Oct 23, 12:12&#2013266080;pm, Michael Black <et...@ncf.ca> wrote: >> On Sun, 23 Oct 2011, Tom Biasi wrote: >> > On Sat, 22 Oct 2011 16:35:24 -0700 (PDT), Brigitte Gaudet >> > <gaudet.brigi...@gmail.com> wrote: >> >> >> On Oct 22, 7:04&#2013266080;pm, Jon Kirwan <j...@infinitefactors.org> wrote: >> >>> On Sat, 22 Oct 2011 19:00:38 -0400, Tom Biasi >> >> >>> <tombi...@optonline.net> wrote: >> >>>> On Sat, 22 Oct 2011 15:11:31 -0700 (PDT), Brigitte Gaudet >> >>>> <gaudet.brigi...@gmail.com> wrote: >> >> >>>>> Hello, >> >> >>>>> My 4017A function generator just died on me today. I opened it up and >> >>>>> saw two badly burnt resistors. I would like to replace them but I do >> >>>>> not know their values. How can I get the schematic for the 4017A >> >>>>> function generator? or anybody has this model and can tell me their >> >>>>> values? &#2013266080;R624 and R148. >> >>>>> thank you for your help. >> >> >>>>> ken >> >>>> Who makes the 4017A? >> >> >>> B&K >> >> >>> Jon >> >> >> exactly &#2013266080;B&K >> >> >> Ken >> > My point was that you should include the make and model number with >> > your question. >> > More important question. Would you just replace those resistors? >> >> Yes. >> >> Initially I didn't realize it was a commercial piece of piece of >> equipment, I read the "4017" in the subject header as the famous CMOS IC, >> and thought it was some piece of home made equipment made from a 4017. >> >> &#2013266080; &#2013266080;Michael > >Called B&K tech support, the guy emailed the parts list and >schematics. >..wonderful.
Consider uploading it to here http://www.ko4bb.com/cgi-bin/manuals.pl