Putz Wad Doe <always.look@message.header> wrote in
news:so82gt$hk4$2@dont-email.me: 

> It's a toolbar item/selection somewhere. 
> 
> I included "Thanks" in my original post. To any normal person,
> that means "thanks in advance", as in any legitimate answer is
> appreciated. 
> 
> This is one of the rare posts where a very creepy poster with a
> big ego problem complains about not being personally thanked for
> its alleged contribution... 
> 

  You being in possession of even the slightest intelligence, much 
less grace or manners is what is alleged.

  Your whore mother was creepy for shitting you out of her ass and 
forgetting to flush, but I fucked the skanky slut amyway.

  This was one of those every time you post posts where you cannot 
keep yourself from insulting folks.  Fuck Off And Die.

  You were so much of a pussy over it, you had to include your 
pathetic follow up add of a non-existent group.  It does not get more 
stupid or pussified than you, putz wad.

  I provided the exact thing you needed to continue properly in 
AutoDesk's Fusion 360 CAD application.

  And I knew you would not be man enough to add to the thread in a 
civil way, much less acknowledge that you got what you needed.  You 
are a pathetic human being and I should never have assisted you.

The John Doe troll stated the following in message-id 
<sdhn7c$pkp$4@dont-email.me>:

> The troll doesn't even know how to format a USENET post...

And the John Doe troll stated the following in message-id 
<sg3kr7$qt5$1@dont-email.me>:

> The reason Bozo cannot figure out how to get Google to keep from 
> breaking its lines in inappropriate places is because Bozo is 
> CLUELESS...

And yet, the clueless John Doe troll has itself posted yet another
incorrectly formatted USENET posting on Wed, 1 Dec 2021 14:57:34 -0000
(UTC) in message-id <so82gt$hk4$2@dont-email.me>.

This posting is a public service announcement for any google groups
readers who happen by to point out that the John Doe troll does not even
follow it's own rules that it uses to troll other posters.

Yn5uYiEiitZJ

It's a toolbar item/selection somewhere. 

I included "Thanks" in my original post. To any normal person, that means
"thanks in advance", as in any legitimate answer is appreciated. 

This is one of the rare posts where a very creepy poster with a big ego 
problem complains about not being personally thanked for its alleged 
contribution... 

-- 
DecadentLinuxUserNumeroUno@decadence.org wrote:

> Path: eternal-september.org!reader02.eternal-september.org!aioe.org!5U2ooNuM5UP0Ynf/GmOnCg.user.46.165.242.91.POSTED!not-for-mail
> From: DecadentLinuxUserNumeroUno@decadence.org
> Newsgroups: sci.electronics.design
> Subject: Re: OT: Fusion 360, single click delete???
> Date: Sun, 28 Nov 2021 17:06:55 -0000 (UTC)
> Organization: Aioe.org NNTP Server
> Message-ID: <so0cvf$ejl$2@gioia.aioe.org>
> References: <sndisr$69c$1@dont-email.me> <snehik$1pr4$3@gioia.aioe.org>
> Injection-Info: gioia.aioe.org; logging-data="14965"; posting-host="5U2ooNuM5UP0Ynf/GmOnCg.user.gioia.aioe.org"; mail-complaints-to="abuse@aioe.org";
> User-Agent: Xnews/5.04.25
> X-Notice: Filtered by postfilter v. 0.9.2
> Xref: reader02.eternal-september.org sci.electronics.design:653776
> 
> DecadentLinuxUserNumeroUno@decadence.org wrote in
> news:snehik$1pr4$3@gioia.aioe.org: 
> 
>> John Doe <always.look@message.header> wrote in
>> news:sndisr$69c$1@dont-email.me: 
>> 
>>> I thought I saw somebody using a nifty little method for cleaning
>>> up models. He was just single clicking in order to delete stuff.
>>> 
>>> Anybody know that one?
>>> 
>>> Not finding it on YouTube.
>>> 
>>> Thanks.
>>> 
>> 
>>   Down at the bottom of the screen is a slider bar that lets you
>>   step 
>> all the way back to your first sketch one move at a time.  You can
>> hover over each step to see what it is, and selectively delete
>> say...  a round or fillet or chamfer.
>> 
>>   Fusion 360 has a reddit channel.
>> 
> 
>   Nice Job, Doe, of thanking me for solving your problem.
> You're a real stand up guy.
> 
>

DecadentLinuxUserNumeroUno@decadence.org wrote in
news:snehik$1pr4$3@gioia.aioe.org: 

> John Doe <always.look@message.header> wrote in
> news:sndisr$69c$1@dont-email.me: 
> 
>> I thought I saw somebody using a nifty little method for cleaning
>> up models. He was just single clicking in order to delete stuff.
>> 
>> Anybody know that one?
>> 
>> Not finding it on YouTube.
>> 
>> Thanks.
>> 
> 
>   Down at the bottom of the screen is a slider bar that lets you
>   step 
> all the way back to your first sketch one move at a time.  You can
> hover over each step to see what it is, and selectively delete
> say...  a round or fillet or chamfer.
> 
>   Fusion 360 has a reddit channel.
> 

  Nice Job, Doe, of thanking me for solving your problem.
You're a real stand up guy.

John Doe <always.look@message.header> wrote in
news:sndisr$69c$1@dont-email.me: 

> I thought I saw somebody using a nifty little method for cleaning
> up models. He was just single clicking in order to delete stuff.
> 
> Anybody know that one?
> 
> Not finding it on YouTube.
> 
> Thanks.
> 

  Down at the bottom of the screen is a slider bar that lets you step 
all the way back to your first sketch one move at a time.  You can 
hover over each step to see what it is, and selectively delete say...  
a round or fillet or chamfer.

  Fusion 360 has a reddit channel.