The hard limit of the controller's clamp is 14V, but the output voltage
is 13.6 and the secondary/aux ratio is 1, so the clamp should never be
active. The controller is UCC28701.
Best regards, Piotr
Reply by ●July 26, 20202020-07-26
On Sun, 26 Jul 2020 09:19:31 +0200, Piotr Wyderski
<peter.pan@neverland.mil> wrote:
>Some time ago James Arthur sent here a notification about the
>IMBF170R1K0M1XTMA1 SiC MOSFET. I have just re-prototyped one of my wide
>input range flybacks, and the results are excellent. The performance is
>comparable to the one with the 1700V C2M Cree part, but the converter's
>structure is much simpler, which is good for reliability.
>
>Thanks, James.
>
> Best regards, Piotr
>
What gate swing are you using?
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard
Reply by Piotr Wyderski●July 26, 20202020-07-26
Some time ago James Arthur sent here a notification about the
IMBF170R1K0M1XTMA1 SiC MOSFET. I have just re-prototyped one of my wide
input range flybacks, and the results are excellent. The performance is
comparable to the one with the 1700V C2M Cree part, but the converter's
structure is much simpler, which is good for reliability.
Thanks, James.
Best regards, Piotr