On Thursday, 27 December 2018 00:33:18 UTC-5, Sujith Anandan wrote:
> Hello,
>
> One of my forum friend has donated me a defective TH2821B LCR meter which is showing "NO Or" when powered ON.
>
> FW Ver: r 3.0.00
>
> I tried looking for any dry solder on the pcb etc..and is looking fine.
>
> tried to contact Tonghui support but no response.
>
> Anybody has got any idea what is this error and is it resolvable?
>
> Thank you.
If the original owner didn't blow up the front end somehow and things look okay, I would suspect the data in the SEEPROM has been corrupted.
--Spehro Pefhany
Reply by Waussie●December 27, 20182018-12-27
On 27-Dec-18 5:10 PM, Sujith Anandan wrote:
> On Thursday, December 27, 2018 at 1:55:46 PM UTC+5:30, Waussie wrote:
>> On 27-Dec-18 1:33 PM, Sujith Anandan wrote:
>>> TH2821B LCR meter which is showing "NO Or
>>
>> <http://www.eevblog.com/forum/repair/tonghui-th2821b-lcr-meter-_no-or_-error/>
>
> I am talking about the very same meter! he donated it to me.
>
Give it back and tell him it doesn't work! ;)
Reply by Clifford Heath●December 27, 20182018-12-27
On 27/12/18 8:10 pm, Sujith Anandan wrote:
> On Thursday, December 27, 2018 at 1:55:46 PM UTC+5:30, Waussie wrote:
>> On 27-Dec-18 1:33 PM, Sujith Anandan wrote:
>>> TH2821B LCR meter which is showing "NO Or
>>
>> <http://www.eevblog.com/forum/repair/tonghui-th2821b-lcr-meter-_no-or_-error/>
>
> I am talking about the very same meter! he donated it to me.
Looks like it was too cheap, even at half the price.
Reply by Sujith Anandan●December 27, 20182018-12-27
On Thursday, December 27, 2018 at 1:55:46 PM UTC+5:30, Waussie wrote:
Reply by Sujith Anandan●December 27, 20182018-12-27
Hello,
One of my forum friend has donated me a defective TH2821B LCR meter which is showing "NO Or" when powered ON.
FW Ver: r 3.0.00
I tried looking for any dry solder on the pcb etc..and is looking fine.
tried to contact Tonghui support but no response.
Anybody has got any idea what is this error and is it resolvable?
Thank you.