In article <2uYRC.350497$Xa4.172505@fx29.am4>, 
f6ceedb9c75b52f7fcc0a55cf0cfbf5d_1104@example.com says...
> 
> responding to
> http://www.electrondepot.com/electrodesign/fincor-pid-dancer-schematic-or-manual-needed-872797-.htm
> , Don wrote:
> > Ken wrote:
> >
> > responding to
> >
> http://www.electrondepot.com/electrodesign/fincor-pid-dancer-schematic-or-manual-needed-872797-.htm
> > , Ken wrote:
> > > jamie_ka1lpa  wrote:
> > >
> > > 
> > > 
> > > I know many of your old farts here have a collection of schematics
> > or at
> > >  
> > > least manuals.... 
> > > 
> > >  I can not find the manual or maybe even the schematic that
> > sometimes  
> > > comes with these manuals for a : 
> > > 
> > >   Fincor 105456401 , 1900-77  
> > >   
> > >   
> > >   This is a PID dancer controller with a tach following option.  
> > > 
> > >   If need be I can reverse engineer one using TinyCad or some
> > common  
> > > free electronic CAD program so I can study it to get a better  
> > > understanding of the option dip switches and pots on it that don't
> > seem 
> > > 
> > > to have much obvious use. 
> > > 
> > > Jamie 
> > > 
> > Do you still need the manual?  I have a copy.
> > 
> > Ken
> > 
> 
> Jamie,
> 
> I am also interested in the 1900-77, can I get a copy of the info?  Thanks

I reversed engineered most of it using TinyCad, If you are still 
interested I'll dig it up.

responding to
http://www.electrondepot.com/electrodesign/fincor-pid-dancer-schematic-or-manual-needed-872797-.htm
, Don wrote:
> Ken wrote:
>
> responding to
>
http://www.electrondepot.com/electrodesign/fincor-pid-dancer-schematic-or-manual-needed-872797-.htm
> , Ken wrote:
> > jamie_ka1lpa  wrote:
> >
> > 
> > 
> > I know many of your old farts here have a collection of schematics
> or at
> >  
> > least manuals.... 
> > 
> >  I can not find the manual or maybe even the schematic that
> sometimes  
> > comes with these manuals for a : 
> > 
> >   Fincor 105456401 , 1900-77  
> >   
> >   
> >   This is a PID dancer controller with a tach following option.  
> > 
> >   If need be I can reverse engineer one using TinyCad or some
> common  
> > free electronic CAD program so I can study it to get a better  
> > understanding of the option dip switches and pots on it that don't
> seem 
> > 
> > to have much obvious use. 
> > 
> > Jamie 
> > 
> Do you still need the manual?  I have a copy.
> 
> Ken
> 

Jamie,

I am also interested in the 1900-77, can I get a copy of the info?  Thanks

responding to
http://www.electrondepot.com/electrodesign/fincor-pid-dancer-schematic-or-manual-needed-872797-.htm
, Ken wrote:
> jamie_ka1lpa  wrote:
>
> 
> 
> I know many of your old farts here have a collection of schematics or at
>  
> least manuals.... 
> 
>  I can not find the manual or maybe even the schematic that sometimes  
> comes with these manuals for a : 
> 
>   Fincor 105456401 , 1900-77  
>   
>   
>   This is a PID dancer controller with a tach following option.  
> 
>   If need be I can reverse engineer one using TinyCad or some common  
> free electronic CAD program so I can study it to get a better  
> understanding of the option dip switches and pots on it that don't seem 
> 
> to have much obvious use. 
> 
> Jamie 
> 
Do you still need the manual?  I have a copy.

Ken

I know many of your old farts here have a collection of schematics or at 
least manuals....

 I can not find the manual or maybe even the schematic that sometimes 
comes with these manuals for a :

  Fincor 105456401 , 1900-77 
 
 
  This is a PID dancer controller with a tach following option. 

  If need be I can reverse engineer one using TinyCad or some common 
free electronic CAD program so I can study it to get a better 
understanding of the option dip switches and pots on it that don't seem 
to have much obvious use.

Jamie