Hi Experts :-)
I have an Epson 1640SU that worked very well until
today. Now, when I press the start button, it
click-clicks and the carriage does not move.
I removed the screws and tried t...
Is prefiltering or filtering before the phase sensitive detection step
of lock in a common practice?
If the signal frequency is in a fairly narrow band, say one octave,
can a band pass filter spe...
Are all the fundamental forces nothing but simple PHASE differences?
"in phase attract"
Type those three words - above - into Google (Include quote marks) to
learn not only the basics of electr...
What is a general term for a connector - any connector in common
use, male or female - that's fitted at the end of a cable, to
distinguish it from one that's mounted on a box or a pcb?
...
Hi,
how people have connected a printer to micro controller?
On my quest to learn PICs (mostly the 32-bit).
I have only used included basic in the BV513 to learn
how to connect external circui...
I used a dimmer circuit to control my heater 1600 W instead of a solid
stste relay as both use a equal 25A triac as a on and off switch.
The triac of the dimmer circuit become very hot which is unex...
Hello all,
a related issue came up in the pinball newsgroup I read regularly...
Suppose you have an AC electric motor that spins at 100 rpm when supplied
with a 110 VAC, 60 Hz electricity sour...
can anyone offer any suggestions on how to make a simple 4mA current
regulator... I started looking at LM317 voltage regulators, but found
that they're gonna output a minimum of 10mA... I'm now look...