OT: LDMicro.EXE program

Started by Robert Baer May 28, 2009
   Would somebody please make the following additions to the LDMicro.EXE 
program?

   I have the following inputs / suggestions:
   1) Allow use of the PageUp and PageDown keys for more rapid movement
thru a long program.
   2) Add a Find utility: rung numbers and variable names or partial match.
   3) Allow cut and paste for rapid addition of duplicate structures 
(that is one reason i used a text editor on my LD files).
   Maybe the paste adds an "A" to variable names the first time, a
"B"
the second time, etc to prevent duplication.
   4) Allow more than 98 rungs; i am running out (!).

   What would it take to add the PIC18F6527-I/PT to the list of MCUs?

Robert Baer wrote:
> Would somebody please make the following additions to the LDMicro.EXE > program? > > I have the following inputs / suggestions: > 1) Allow use of the PageUp and PageDown keys for more rapid movement > thru a long program. > 2) Add a Find utility: rung numbers and variable names or partial match. > 3) Allow cut and paste for rapid addition of duplicate structures > (that is one reason i used a text editor on my LD files). > Maybe the paste adds an "A" to variable names the first time, a
"B"
> the second time, etc to prevent duplication. > 4) Allow more than 98 rungs; i am running out (!). > > What would it take to add the PIC18F6527-I/PT to the list of MCUs? >
well. there's the websight. http://www.cq.cx/ladder.pl Source code is there, Have at it.!
On May 28, 1:34 pm, Jamie
<jamie_ka1lpa_not_valid_after_ka1l...@charter.net> wrote:
> Robert Baer wrote: > > Would somebody please make the following additions to the LDMicro.EXE > > program? > > > I have the following inputs / suggestions: > > 1) Allow use of the PageUp and PageDown keys for more rapid movement > > thru a long program. > > 2) Add a Find utility: rung numbers and variable names or partial
match.
> > 3) Allow cut and paste for rapid addition of duplicate structures > > (that is one reason i used a text editor on my LD files). > > Maybe the paste adds an "A" to variable names the first time,
a "B"
> > the second time, etc to prevent duplication. > > 4) Allow more than 98 rungs; i am running out (!). > > > What would it take to add the PIC18F6527-I/PT to the list of MCUs? > > well. there's the websight.http://www.cq.cx/ladder.pl > > Source code is there, Have at it.!
"websight"???
Jamie wrote:
> Robert Baer wrote: > >> Would somebody please make the following additions to the >> LDMicro.EXE program? >> >> I have the following inputs / suggestions: >> 1) Allow use of the PageUp and PageDown keys for more rapid movement >> thru a long program. >> 2) Add a Find utility: rung numbers and variable names or partial >> match. >> 3) Allow cut and paste for rapid addition of duplicate structures >> (that is one reason i used a text editor on my LD files). >> Maybe the paste adds an "A" to variable names the first time, a
"B"
>> the second time, etc to prevent duplication. >> 4) Allow more than 98 rungs; i am running out (!). >> >> What would it take to add the PIC18F6527-I/PT to the list of MCUs? >> > well. there's the websight. > http://www.cq.cx/ladder.pl > > Source code is there, Have at it.! >
Not a programer, just a tinkerer.
a7yvm109gf5d1@netzero.com wrote:

> On May 28, 1:34 pm, Jamie > <jamie_ka1lpa_not_valid_after_ka1l...@charter.net> wrote: > >>Robert Baer wrote: >> >>> Would somebody please make the following additions to the LDMicro.EXE >>>program? >> >>> I have the following inputs / suggestions: >>> 1) Allow use of the PageUp and PageDown keys for more rapid movement >>>thru a long program. >>> 2) Add a Find utility: rung numbers and variable names or partial
match.
>>> 3) Allow cut and paste for rapid addition of duplicate structures >>>(that is one reason i used a text editor on my LD files). >>> Maybe the paste adds an "A" to variable names the first
time, a "B"
>>>the second time, etc to prevent duplication. >>> 4) Allow more than 98 rungs; i am running out (!). >> >>> What would it take to add the PIC18F6527-I/PT to the list of MCUs? >> >>well. there's the websight.http://www.cq.cx/ladder.pl >> >> Source code is there, Have at it.! > > > "websight"???
Picky, picky, picky!
Jamie wrote:
> Robert Baer wrote: > >> Would somebody please make the following additions to the >> LDMicro.EXE program? >> >> I have the following inputs / suggestions: >> 1) Allow use of the PageUp and PageDown keys for more rapid movement >> thru a long program. >> 2) Add a Find utility: rung numbers and variable names or partial >> match. >> 3) Allow cut and paste for rapid addition of duplicate structures >> (that is one reason i used a text editor on my LD files). >> Maybe the paste adds an "A" to variable names the first time, a
"B"
>> the second time, etc to prevent duplication. >> 4) Allow more than 98 rungs; i am running out (!). >> >> What would it take to add the PIC18F6527-I/PT to the list of MCUs? >> > well. there's the websight. > http://www.cq.cx/ladder.pl > > Source code is there, Have at it.! >
Not a programer, just a tinkerer.
a7yvm109gf5d1@netzero.com wrote:

> On May 28, 1:34 pm, Jamie > <jamie_ka1lpa_not_valid_after_ka1l...@charter.net> wrote: > >>Robert Baer wrote: >> >>> Would somebody please make the following additions to the LDMicro.EXE >>>program? >> >>> I have the following inputs / suggestions: >>> 1) Allow use of the PageUp and PageDown keys for more rapid movement >>>thru a long program. >>> 2) Add a Find utility: rung numbers and variable names or partial
match.
>>> 3) Allow cut and paste for rapid addition of duplicate structures >>>(that is one reason i used a text editor on my LD files). >>> Maybe the paste adds an "A" to variable names the first
time, a "B"
>>>the second time, etc to prevent duplication. >>> 4) Allow more than 98 rungs; i am running out (!). >> >>> What would it take to add the PIC18F6527-I/PT to the list of MCUs? >> >>well. there's the websight.http://www.cq.cx/ladder.pl >> >> Source code is there, Have at it.! > > > "websight"???
Picky, picky, picky!
On May 28, 1:34 pm, Jamie
<jamie_ka1lpa_not_valid_after_ka1l...@charter.net> wrote:
> Robert Baer wrote: > > Would somebody please make the following additions to the LDMicro.EXE > > program? > > > I have the following inputs / suggestions: > > 1) Allow use of the PageUp and PageDown keys for more rapid movement > > thru a long program. > > 2) Add a Find utility: rung numbers and variable names or partial
match.
> > 3) Allow cut and paste for rapid addition of duplicate structures > > (that is one reason i used a text editor on my LD files). > > Maybe the paste adds an "A" to variable names the first time,
a "B"
> > the second time, etc to prevent duplication. > > 4) Allow more than 98 rungs; i am running out (!). > > > What would it take to add the PIC18F6527-I/PT to the list of MCUs? > > well. there's the websight.http://www.cq.cx/ladder.pl > > Source code is there, Have at it.!
"websight"???
Robert Baer wrote:
> Would somebody please make the following additions to the LDMicro.EXE > program? > > I have the following inputs / suggestions: > 1) Allow use of the PageUp and PageDown keys for more rapid movement > thru a long program. > 2) Add a Find utility: rung numbers and variable names or partial match. > 3) Allow cut and paste for rapid addition of duplicate structures > (that is one reason i used a text editor on my LD files). > Maybe the paste adds an "A" to variable names the first time, a
"B"
> the second time, etc to prevent duplication. > 4) Allow more than 98 rungs; i am running out (!). > > What would it take to add the PIC18F6527-I/PT to the list of MCUs? >
well. there's the websight. http://www.cq.cx/ladder.pl Source code is there, Have at it.!
   Would somebody please make the following additions to the LDMicro.EXE 
program?

   I have the following inputs / suggestions:
   1) Allow use of the PageUp and PageDown keys for more rapid movement
thru a long program.
   2) Add a Find utility: rung numbers and variable names or partial match.
   3) Allow cut and paste for rapid addition of duplicate structures 
(that is one reason i used a text editor on my LD files).
   Maybe the paste adds an "A" to variable names the first time, a
"B"
the second time, etc to prevent duplication.
   4) Allow more than 98 rungs; i am running out (!).

   What would it take to add the PIC18F6527-I/PT to the list of MCUs?